News
Follow our latest container shipments, alloy selection guides for industrial procurement, and quality control standards from our Wuxi processing base.
The Differences Begin with the Composition
304 is a typical 18Cr-8Ni austenitic stainless steel. It is extremely versatile and is one of the most widely shipped grades for sheet, coil, pipe, and bar products. 316L is based on 304 but contains approximately 2%–3% molybdenum (Mo) and has a lower carbon content—the “L” in the grade designation stands for “Low Carbon.”
Molybdenum enhances resistance to chloride ion pitting and crevice corrosion, while the low carbon content reduces susceptibility to intergranular corrosion after welding. These two factors determine the respective application limits of the two grades.
It’s not that “316L is better in every way”; rather, the operating conditions determine the grade to use.
In dry indoor environments, general atmospheric conditions, architectural finishes, kitchenware, and applications involving contact with non-high-salt foods, the corrosion resistance of 304 is sufficient. Furthermore, 304 offers wider availability, more surface finish options, and better cost control. In these cases, selecting 316L would result in the additional cost of the molybdenum alloy without providing corresponding benefits.
However, when chloride ions are present in the medium, or when the environment is persistently humid, saline, or at elevated temperatures, the value of 316L becomes evident: for chemical and petrochemical equipment, coastal building components, seawater heat exchange systems, pharmaceutical and bleaching processes, salt-cured food processing equipment, as well as components requiring frequent welding without post-weld annealing, it is generally recommended to select 316L or a higher grade.
Even for the same grade, surface finishes can affect both application and price.
The grade is only half the story when selecting a product. When placing an order, you must also specify the surface finish: 2B is a general-purpose cold-rolled finish suitable for most industrial applications; BA (bright annealed) has a smooth surface and is commonly used in home appliances and food processing equipment; No. 4 brushed and mirror finishes are often used in elevators and decorative panels; No. 1 is a hot-rolled industrial finish suitable for high-temperature or heavy industrial environments. For the same grade but with different surface finishes, there can be significant differences in purchase price and suitable applications.
In addition, applicable standards (such as ASTM A240, EN 10088, etc.), thickness tolerances, and whether a protective film is required should all be clearly specified at the time of the initial inquiry to avoid back-and-forth revisions to the quote.
Five Questions for Purchasing Personnel
What is the medium in contact with the material, and what is the approximate chloride ion concentration?
What is the long-term operating temperature range?
Will welding be required, and can solution annealing or acid pickling and passivation be performed after welding?
Are there specific requirements for surface finish or hygiene grade?
Which standards apply to the project, and what documentation is required for acceptance?
Including these five items—along with the grade, thickness, dimensions, and quantity—in your request for quotation will yield more accurate and actionable quotes than simply sending a message saying, “I need 304 sheet.”
We can supply materials tailored to the grade, thickness, dimensions, surface finish, and applicable standards, and provide the corresponding furnace number and certificate of conformity with each batch. If you are unsure about the operating conditions, please send us the medium and temperature conditions, and our engineering staff will assist in verifying the appropriate material selection.
Navigation

Scan or Click to Chat →